Step 1 — Connect the Hose to the Pump
Your electric pump has 2 connections — one for inflate and one for deflate. Choose according to whether you are inflating or deflating your board.
If you hear a loud whistle noise when using your electric pump, the hose might be connected using the wrong end. Try reversing it.
Step 2 — Find the Right Seal
Various rubber sealing washers are provided with your kit. Test several to see which one best connects and seals the hose from your pump to the valve on your inflatable board.
The Wild Tribe boards work with the rubber sealing that comes pre-installed on our electric pumps.
Step 3 — Connect to the Valve
Connect the hose to the valve on the board and secure it by pressing and turning to engage the hooks inside the valve.
Utilize the natural curvature of your pump hose so the hose goes downward before connecting to the valve. This prevents the hose from popping out due to stiffness.
Step 4 — Set PSI and Start Pumping
Set your desired PSI on the pump's display (20 PSI recommended for most TWT boards). Press start and let the pump do the work. It will automatically stop when the target pressure is reached.
The entire process takes about 7-12 minutes depending on board size and target PSI.
You just need to plug in your converter, then plug your pump into it.
Shop Now
